Hard Cut Rev Limiter installed but not working.

Discussion on the Hard Rev Limiter module, currently under beta testing. <a href="http://www.autosportlabs.net/Hard_rev_limiter_1.1.0">Project Information</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
RonanVauxhallNova
Posts: 2
Joined: Tue Jan 28, 2014 9:32 pm
Location: Ireland

Hard Cut Rev Limiter installed but not working.

Post by RonanVauxhallNova »

I installed my hard cut rev limiter board into the case. I ran the coil wire from the COIL-POWER pin on the megajolt to the middle pin on the coil.
Does anyone have any idea what I am doing wrong?[/b]
Vauxhall 1400 16v megajolt 120bhp

Not Anumber
Posts: 13
Joined: Sat Apr 20, 2013 3:47 pm
Location: Southend on Sea. UK

Post by Not Anumber »

Is it not powering the coil or is it not breaking the connection when the rev limit is reached ?

RonanVauxhallNova
Posts: 2
Joined: Tue Jan 28, 2014 9:32 pm
Location: Ireland

Post by RonanVauxhallNova »

I have the limiter feeding the coil, it just won't break the power when the limit is reached.
Vauxhall 1400 16v megajolt 120bhp

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi RonanVauxhallNova,

Can you post a picture of the wiring between Megajolt and the hard rev limiter board?

Also, when you connect the Megajolt up to your computer, does it show run-time activity? RPM, advance changing, etc?
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply