Are empty holes OK ?

Discussion on the Hard Rev Limiter module, currently under beta testing. <a href="http://www.autosportlabs.net/Hard_rev_limiter_1.1.0">Project Information</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
crossflow
Posts: 16
Joined: Thu Jan 06, 2011 10:09 am
Location: Germany

Are empty holes OK ?

Post by crossflow »

Hi,
many, many years ago,
I bought a Hard Rev Limiter V 1.2.0.
I am about to put it in my only recently purchased MegaJolt.

I have read the instructions and
I understand that I have to solder 4 wires.

Must I soder anything else ?
There are still 3 empty holes, marked C, B and E
I guess that it is a question of either / or.
Either SMD components or through hole components.

Please clarify.

Cornelius

brentp
Site Admin
Posts: 6160
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi, please post pictures of what you have to clarify, and we can help you. Thanks!
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

crossflow
Posts: 16
Joined: Thu Jan 06, 2011 10:09 am
Location: Germany

Post by crossflow »

here is the picture
Attachments
HardRevLimiter.jpg
HardRevLimiter.jpg (190.98 KiB) Viewed 923 times

brentp
Site Admin
Posts: 6160
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi, you can safely ignore those empty holes. Just solder the 3 connections per the instructions.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

crossflow
Posts: 16
Joined: Thu Jan 06, 2011 10:09 am
Location: Germany

Post by crossflow »

Hi, thanks for your help.
Cornelius

Post Reply