Hard Rev Limiter Rev B

Discussion on the Hard Rev Limiter module, currently under beta testing. <a href="http://www.autosportlabs.net/Hard_rev_limiter_1.1.0">Project Information</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
weiss enterprises
Posts: 4
Joined: Wed Nov 30, 2016 11:34 pm

Hard Rev Limiter Rev B

Post by weiss enterprises »

I'm using a Megajolt/e on an Autocraft 4 cyl and it works great. I want to install the hard rev limiter I got years ago, a version labeled Rev B. It's similar to the 1.2.0 except all the components were already soldered in and it has 8 open ports under the label SV1 ( as well as the 4 on the bottom). I can't find any installation information with a picture of this particular board. Can you direct me to the wiring information for this board or can I install it as is by the 1.2.0 instructions and ignore the 8 SV1 ports?
Thank you..
Steve

Post Reply