Hard Rev Limiter Rev B
Posted: Mon May 21, 2018 3:20 am
I'm using a Megajolt/e on an Autocraft 4 cyl and it works great. I want to install the hard rev limiter I got years ago, a version labeled Rev B. It's similar to the 1.2.0 except all the components were already soldered in and it has 8 open ports under the label SV1 ( as well as the 4 on the bottom). I can't find any installation information with a picture of this particular board. Can you direct me to the wiring information for this board or can I install it as is by the 1.2.0 instructions and ignore the 8 SV1 ports?
Thank you..
Steve
Thank you..
Steve