Well, yesterday new components arrived from Brent.
Since I have removed all components - there were some missing.
And I can't find a detailed BOM-list anywhere on the site, hence I have some questions I hope someone can help me with so that I can order the final components:
(Bare in mind that this is a V3 board)
Does the 1N4002 replace the 1N4004 mentioned in the assembly guide ?
Would a 0.095 A @ 120 Hz 85°C 25 V dc be a suitable 33uf capacitator for C1 and C3 ?
D5, what should I more look for than it being 12V. I see that they come in different watts.
Same with D1, which is a 5V diod. What other things should I look for when bying a new one ?
T2 transistor - when I look up 2N2222 I get one that looks like the enclosed image. Judging from the picture does it look correct - and/or what should I be looking for in the transistor.
C12 - is a 1000pF the same as a 0.001uF ? And what else should I be looking for when choosing one ?
C13 - is a 220pF the same as a 0.22uF (then the above is a wrong assumption).
C14 - is a 16V ok ?
(I'm ordering all of this from a firm called ELFA in Scandinavia)