Programming a MC68hc908QT4 processor for test rig.

Megajolt Kit assembly Question and Answers. Be sure to review the <a href="http://www.autosportlabs.net/MJLJ_V4_kit_assembly_guide">Kit assembly guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Paul f
Posts: 5
Joined: Mon Nov 22, 2004 9:21 pm

Programming a MC68hc908QT4 processor for test rig.

Post by Paul f »

Can any one help me with information on the required connections and conditions to put this chip into the correct mode to flash it?. It is the 8 pin processor used for the VR simulator on the Bowling and Grippo site.I built a programmer for the 16 pin kx8 processor in the megajolt and would like to make an adaptor board to allow me to connect the 8 pin processor, but dont understand enough to work out which pins i require to flash it.
Paul.
Top
Post Reply

Return to “Assembly”