Factory Reset

General Q&A specific to RaceCapture/Pro. For app related questions post in the RaceCapture App forum. also see the <a href="http://www.autosportlabs.net/RaceCapture">RaceCapture Information Page</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Vrushabh
Posts: 22
Joined: Tue Apr 04, 2017 7:26 pm

Factory Reset

Post by Vrushabh »

This is a general question. How can we factory reset our Race Capture MK3 with all default setting. It would be great if some one explains all various method to do so.

Thank You

boggie1688
Posts: 138
Joined: Fri Apr 07, 2017 3:47 pm
Location: Oakland, CA

Post by boggie1688 »

Use a terminal program like Putty. Select the correct COM port needed to access your RCP. The COM port is determined automatically by the computer, just check to see which one it has decided to use.

IE, select COM3 if it is the one associated with the RCP.

One you connect via terminal, you will see a blank screen. Hit enter. The terminal will echo a list of commands that the RCP will accept. One of the commands at the top of the list is resetConfig. (or something like that)

Type the command in, case sensitive, and hit enter.

You'll lose connection as the RCP3 does a hard reset.

Vrushabh
Posts: 22
Joined: Tue Apr 04, 2017 7:26 pm

Post by Vrushabh »

Thanks it worked well for me.

boggie1688
Posts: 138
Joined: Fri Apr 07, 2017 3:47 pm
Location: Oakland, CA

Post by boggie1688 »

Your welcome.

Post Reply