Wiring Error on Product Brief Picture

General Q&A specific to RaceCapture/Pro. For app related questions post in the RaceCapture App forum. also see the <a href="http://www.autosportlabs.net/RaceCapture">RaceCapture Information Page</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
stephen
Posts: 10
Joined: Wed Aug 22, 2018 2:32 am

Wiring Error on Product Brief Picture

Post by stephen »

On the initial Product Brief Page the wiring to back of RCmk3 is back to front. Red/Black 12V and earth are at wrong end of Molex Plug.
Attachments
snip_20180822174256.png
snip_20180822174256.png (122.76 KiB) Viewed 5621 times

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Sharp eye! Yes, you spotted an early photo error. Please use the official wiring diagram on the wiki.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

stephen
Posts: 10
Joined: Wed Aug 22, 2018 2:32 am

Post by stephen »

I did use the official diagram but since the BBQ table incident I check three times. Just before I powered on I wanted a another quick check and it was the first image that came up. Made me wonder if I confused Male and female diagrams again.

Post Reply