3D printed Race Capture Pro mount.

Race Capture Pro hardware installation- power, wiring, physical installation, etc. See the dedicated forum for Sensor related topics

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Posts: 30
Joined: Tue Sep 22, 2015 3:09 am

3D printed Race Capture Pro mount.

Post by torkey »

I just posted my design for a 3D printed Race Capture Pro mount.

It's designed for 1.75 diameter roll cage tubing and uses a standard metal hose clamp to mount to the cage. Once printed, holes need to be drilled on the platform.
Prints well with ABS or PLA. Carbon fiber PLA from ProtoPasta is my favorite filament for this.


Posts: 26
Joined: Fri Oct 31, 2014 4:21 am
Location: Dallas, TX

Post by loftygoals »

This is nice! Thanks for sharing with the community!


Post Reply