Page 1 of 1
Analog Outputs on RaceCapture Mk2
Posted: Wed Aug 19, 2020 1:59 pm
by ZincBoy
I have a RaceCapture Mk2 and am trying to use the analog outputs to drive gauges. When I configure the app to connect RPM to an analog out, the output goes to 5V and does not vary with RPM at all. The app shows the RPM varying as expected but nothing on the analog output.
I am missing something that needs to be configured?
Re: Analog Outputs on RaceCapture Mk2
Posted: Wed Aug 19, 2020 7:19 pm
by Canyonfive
post your script for what you are doing....
also what kind of signal is the gauge looking for?
Re: Analog Outputs on RaceCapture Mk2
Posted: Wed Aug 19, 2020 8:35 pm
by ZincBoy
No script, just using the RaceCapture GUI to select RPM as the analog output with appropriate scaling factors. Are the analog outputs only usable through the LUA scripts?
The gauge expects 0 to 5V corresponding to 0 to 6500RPM.
Re: Analog Outputs on RaceCapture Mk2
Posted: Sat Aug 29, 2020 7:26 pm
by brentp
Hi, The channel configuration for the analog outputs only configure how it's locally logged in the log file; it does not "connect RPM to the Analog output".
You would use a Lua script to actually control the output, which is a more advanced topic. Information here:
https://wiki.autosportlabs.com/RaceCapt ... _Scripting
Hope this helps,