engine temp and oil temp

Race Capture Pro hardware installation- power, wiring, physical installation, etc. See the dedicated forum for Sensor related topics

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Richard Tremblay
Posts: 1
Joined: Tue Feb 09, 2021 10:40 pm

engine temp and oil temp

Post by Richard Tremblay »

I have install a racecapture/pro mk3 set up on my carburated 2.3l ford lima engine that go in my hydroplane. I am now triing to calibrate all my sensor. the problem that I have is that the engine temp and the oil temp sensors are indicating high temp on the dashboard while it is at room temperature. these sensors come from the discrete sensor kit that I bought to you. did I wired something wrong?

Site Admin
Posts: 6233
Joined: Wed Jan 24, 2007 6:36 am

Re: engine temp and oil temp

Post by brentp »

Sounds like it. Best to check the wiring and ensure you have the pullup resistors connected, if it is a 2 wire temperature sensor.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply