Analog sensor channel mapping

All sensor specific discussions! Temperature, pressure, steering angle, brake and throttle, etc. Post adaptations of OEM-style sensors, and also your clever DIY hacks and custom designs here too!

Moderators: JeffC, rdoherty, stieg

Post Reply
Posts: 12
Joined: Wed Nov 25, 2020 4:09 pm

Analog sensor channel mapping

Post by Nmunn »

Want to get clarity on the analog sensor setup. There are 8 analog sensor HW inputs and in the analog sensor setup there are 9 "slots" to configure. Should I assume these are in sequence, top "slot" is hardware pin 1, slot 2, pin 2, etc? Also, there are 9 of these configurable slots so what is the last one? Is there a way to see how a channel is mapped?

Thanks in advance!

Site Admin
Posts: 6226
Joined: Wed Jan 24, 2007 6:36 am

Re: Analog sensor channel mapping

Post by brentp »

For RaceCapture/Pro, Top channel starts at analog1. 9th (bottom) channel is the built in battery voltage.

The details of a particular channel will show you how it is mapped - raw, linear, or linear interpolation.

Hope this helps,
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply