National Autograss Racer from the Uk

Post here to say hello! Tell us what you drive, what race series you participate in and how you want to use Race Capture to help you go faster. Pics extra welcome!

Moderators: JeffC, rdoherty, stieg

Post Reply
Posts: 1
Joined: Wed Jun 15, 2016 10:28 pm

National Autograss Racer from the Uk

Post by Dave107 »

Hi I'm Dave from the UK, I race Autograss with a fully space framed fiat, running a 1420cc vauxhall 8v on omex and down draughted jenvey throttle bodies.

Im looking at getting most of my gauge data straight from the omex 600 is there an easy way to do this, the scripting is a little baffling at the moment .

Thank you in advance.
E0506 A0627.jpg
E0506 A0627.jpg (47.68 KiB) Viewed 1043 times

Posts: 215
Joined: Fri Mar 08, 2013 3:32 am

Post by rdoherty »

Hi Dave, welcome!

If your Omex 600 outputs data via CANbus or sensor values via 0-5v ranges RCP can read the information. You will have to do some research to figure this out. Once you do we have information on how to decode CANbus data and/or hook up direct sensors on our wiki:
Ryan Doherty
Autosports Labs

Post Reply