Lots of reference to making sure you get the polarity right, or to swaping it if its wrong (no spark) but not found a reference to which pin is +ve and which -ve?
So which is the negative (pin 5 on the edis plug) pin one or two of the 2 ford sensors in this photo?
Might as well aim to get it right first time!
EDIS and Megajolt installation related topics. Be sure to review the <a href="http://www.autosportlabs.net/MJLJ_V4_vehicle_installation_guide">Vehicle installation guide</a>
5 posts • Page 1 of 1
Ahh thats fantasic.david jenkins wrote:Try this link
http://www.locostbuilders.co.uk/viewthr ... tid=112060
(halfway down the page)
- Ive actaully even posted on that page myself, but didnt check back and missed the all important image.
For completness and future ref:
No worries at all.brentp wrote:Looks like we need to update our installation guide! Thanks for posting that.
- Other than this, i dont think there much that i havnt found within the installation guide.
- Ive not actaully got it fitted yet, but i spent yesterday making a test loom and fitting the CPS.
Just need a spindle addapter for the TPS to fitt it to the carbs and we'll see how it goes!