Ford VR Crankshaft Sensor polarity

Dhutch · Post by **Dhutch** » Mon Jun 15, 2009 2:34 pm

Lots of reference to making sure you get the polarity right, or to swaping it if its wrong (no spark) but not found a reference to which pin is +ve and which -ve?

So which is the negative (pin 5 on the edis plug) pin one or two of the 2 ford sensors in this photo?

Might as well aim to get it right first time!

Cheers, Daniel.

david jenkins · Post by **david jenkins** » Tue Jun 16, 2009 11:24 am

Try this link

http://www.locostbuilders.co.uk/viewthr ... tid=112060

(halfway down the page)

Dhutch · Post by **Dhutch** » Tue Jun 16, 2009 1:40 pm

david jenkins wrote:Try this link

http://www.locostbuilders.co.uk/viewthr ... tid=112060

(halfway down the page)

Ahh thats fantasic.
- Ive actaully even posted on that page myself, but didnt check back and missed the all important image.

For completness and future ref:

Daniel

Post by **brentp** » Tue Jun 16, 2009 3:01 pm

Looks like we need to update our installation guide! Thanks for posting that.

Dhutch · Post by **Dhutch** » Tue Jun 16, 2009 5:09 pm

brentp wrote:Looks like we need to update our installation guide! Thanks for posting that.

No worries at all.
- Other than this, i dont think there much that i havnt found within the installation guide.
- Ive not actaully got it fitted yet, but i spent yesterday making a test loom and fitting the CPS.

Just need a spindle addapter for the TPS to fitt it to the carbs and we'll see how it goes!

Daniel