Mount trigger wheel where distributor used to be?

EDIS and Megajolt installation related topics. Be sure to review the <a href="http://www.autosportlabs.net/MJLJ_V4_vehicle_installation_guide">Vehicle installation guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Mckwrench
Posts: 2
Joined: Tue Apr 05, 2016 11:44 pm

Post by Mckwrench »

Patriq wrote:Have you checked here: http://trigger-wheels.com/store/index.html
Yes, that was my first stop. Per their website:

"...it is prohibitively expensive for us to produce 60-x and 72-x wheels.

Patriq
Posts: 161
Joined: Sat May 26, 2007 12:56 pm
Location: Oslo, Norway

Post by Patriq »

Ok. That was my only bet. As you can see, both me and Alexander had ours made bespoke.
All those who believe in telekinesis, raise my hand now !

Dean924s
Posts: 228
Joined: Fri Nov 07, 2008 2:57 am
Location: USA - MA

Post by Dean924s »

I would have to look but McMaster Carr is where I got them. Id did some digging and figured out who the rep was for the supplier to McMaster Carr and spoke with him and found that they had a large selection of 72 tooth spur gears. I had to purchase them through a local seller. Look in my build thread I think I covered it there. If not I would have to really dig as it has been 8 years since I did this (BTW my MJLjr is still going strong with over 300K miles on it!!!)

What is the specific size you are looking for?
Respectfully

Dean

Post Reply