getting a bad waveform

EDIS and Megajolt installation related topics. Be sure to review the <a href="http://www.autosportlabs.net/MJLJ_V4_vehicle_installation_guide">Vehicle installation guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
eds911915
Posts: 32
Joined: Wed Mar 14, 2012 1:51 am
Location: Costa Mesa CA. USA

getting a bad waveform

Post by eds911915 »

iv bin comparing the waveform my vr sensor produces to some that people have posted in the archives and mine looks really bad the peaks and vallies are all waded up and i cant see the missing tooth. I cant post it because im using the origanal snap on vantage but it has alot of edis tests loaded in the software. however i ohmed out the sensor individually and im getting .358 k ohm at the edis module connector and the reading goes open when i disconnect the sensor. the sensor and wheel gap is set at the same thickness of a cd or dvd.

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

What symptoms do you have with the running engine?
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

eds911915
Posts: 32
Joined: Wed Mar 14, 2012 1:51 am
Location: Costa Mesa CA. USA

getting a bad waveform

Post by eds911915 »

the type of driveability im getting is very weak spark. the engine wont run.

Post Reply