location choice for Edis ?

Not Anumber · Post by **Not Anumber** » Sat Apr 20, 2013 4:05 pm

I am new so I'll appologies if this has been asked many times before. I am finally getting round to installing the MJLJv3 on my kit car and am running the cables.

Should I install the Edis4 module on the bulkhead in the engine compartment or would it be safer behind the dash in the passenger compartment next to the MJLJ ?

For best longevity is it better to give the Edis protection from the elements or better to give it airflow for cooling ?

Chris

Post by **brentp** » Sat Apr 20, 2013 7:00 pm

Hi,

Bulkhead is perfectly fine - the EDIS module is sealed from the elements. Megajolt should be installed in a protected location (relatively speaking, if it's an open style kit car

)

Post by **brentp** » Sat Apr 20, 2013 7:00 pm

Hi,

Bulkhead is perfectly fine - the EDIS module is sealed from the elements. Megajolt should be installed in a protected location (relatively speaking, if it's an open style kit car

)

Not Anumber · Post by **Not Anumber** » Sat Apr 20, 2013 7:04 pm

Many thanks Brent