AEM Engine Position Module

EDIS and Megajolt installation related topics. Be sure to review the <a href="">Vehicle installation guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Posts: 1
Joined: Tue Jul 25, 2017 5:47 pm

AEM Engine Position Module

Post by matthepcat »

Can the AEM Engine Position Module be used to capture signal as an alternative to a trigger wheel with Megajolt?

See here: ... 5/10002/-1

It uses a 24 to 1 tooth pattern, and has both hall effect cam signal and hall effect crank signal output.

I know that this cannot drive drive ignition coils directly.

30-3250.jpeg (18.84 KiB) Viewed 6251 times

Site Admin
Posts: 6233
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi, Unfortunately this will not work with the Megajolt system. It must use the VR sensor for the Ford EDIS module.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply