ElapsedTime No Longer Preset in .LOG

Report any thing that looks like a bug or problem in the system here

Moderators: JeffC, stieg

Post Reply
imstimpy
Posts: 36
Joined: Tue Nov 24, 2015 11:37 am

ElapsedTime No Longer Preset in .LOG

Post by imstimpy »

I'd been using 2.8.6 firmware for the past six months. In the logs, ElapsedTime is present. Using ElapsedTime, I can sort of gain a useful delta between laps. I finally ran a track day with 2.8.7 and ElapsedTime is not present in the logs.

Where did it go?

Thanks,
Jon

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi,

This can happen sometimes with the RCP configuration. You can reset the Elapsed Time by doing this:

* Read the configuration
* Go to configuration - toggle race timing and predictive timing off, and then turn both back on.
* Go to GPS and change sample rate from 10 to 1Hz, then back to 10Hz.
* Write the config back to the unit.
* Be sure to save your configuration

This will trigger an automatic sanitization of your config and you should see Elapsed Time now in your dashboard.

Let us know if you're still stuck,
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

imstimpy
Posts: 36
Joined: Tue Nov 24, 2015 11:37 am

Post by imstimpy »

That seems to have fixed it.

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Great! We have it scheduled to be auto-sanitized on the firmware side so this won't happen in the future.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply