System selection Question

Q&A for the RaceCapture Plug & Play - general hardware related usage and operation; for app related questions please post in the RaceCapture app section.

also see the <a href="https://wiki.autosportlabs.com/RaceCapture_Quickstart">RaceCapture quick start guide</a>
Post Reply
Spec _e46_723
Posts: 1
Joined: Tue Jul 20, 2021 2:36 pm

System selection Question

Post by Spec _e46_723 »

Hey everyone,
I am in the process of building a spec e46 race car. I want to use ASL for heal monitoring and race data capture/logging. My plan is to have a Aim Dash and then have a tablet in the center dash running the RaceCapture app for any additional info I want. I am also planning on running a micro PDM control panel. My question is which system do I need in order to run all of this? Can the Pro/ Mk3 run this or do I need to jump to the connect. I am also assuming the track Mk2 two won't be able to handle that much I/Oso its out. thank in advance.

brentp
Site Admin
Posts: 6046
Joined: Wed Jan 24, 2007 6:36 am

Re: System selection Question

Post by brentp »

Hi - RaceCapture/Pro is best if you want to connect direct sensors; if CAN bus only communications; then RaceCapture/Track could be a good fit.

See the comparison matrix near the bottom of the page here:
https://www.autosportlabs.com/racecapture-mk3-apex/

Thanks!
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply