RPM input?

Q&A for the RaceCapture Plug & Play - general hardware related usage and operation; for app related questions please post in the RaceCapture app section.

also see the <a href="https://wiki.autosportlabs.com/RaceCapture_Quickstart">RaceCapture quick start guide</a>
Post Reply
mikesmith
Posts: 21
Joined: Wed May 24, 2017 5:31 am

RPM input?

Post by mikesmith »

I'm looking to see if I can use RCT in a non-CAN vehicle; analog in and display are covered (analogX/shiftX), but it doesn't look like there's a good way to get engine speed (or road speed) in.

I know in a previous thread it was mentioned there's no analog inputs on the CAN connector; presumably no digitals either?

Online
brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi,

RaceCapture/Track sensor's integration is CAN bus only. (2 CAN bus networks are provided)
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply