Miata "mount"

hardware installation for the RaceCapture Plug & Play, including custom installations
Post Reply
TimIrwin
Posts: 13
Joined: Tue Nov 22, 2016 4:13 am

Miata "mount"

Post by TimIrwin »

OK, this one is so simple it's hardly worth posting, but perhaps it will provide some ideas. A while ago I added a 12v outlet inside the center console, so dropping the RC in there was pretty simple with a bit of industrial strength velcro (may switch to the "Scotch" fastener at some point). Note that I don't have an OBD connection as it's a '94 with a Hydra ECU. Hidden (no distracting flashing lights), near center of car, easily powered, and good GPS (since it's a Miata).
Attachments
IMG_20170520_173316.jpg
IMG_20170520_173316.jpg (135.25 KiB) Viewed 2666 times
Tim Irwin
1994 R Package

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

That's a nice install! Pretty stealth, too.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply