Page 1 of 1

Eric Z with a 2008 Audi RS4 project

Posted: Fri Sep 11, 2020 9:24 pm
by EricZ
Hi fellow RC Track users! I'm EricZ and I live in Candler, NC.

I have a 2008 Audi RS4 that I have made some silly/nerdy modifications to including adding a BorgWarner S400SX-E and two pre-production eBoosters (48V electric compressors) mounted in the rear! It's my daily driver, but she will see the occasional track day just for fun.

I use the RaceCapture MK2 Track to monitor and data log parameters from the factory Audi CAN bus along with some additional sensors I have added, controlled by an Arduino Mega. I display the data on an Android head unit in the car. Thru the Lua scripting, the RaceCapture also sends relevant parameters from the factory Audi system to the Arduino, which is also responsible for controlling/commanding/monitoring the eBooster operation as well as the 48V system.

Here is a link to my build thread on an Audi forum, and I am working towards the finish line and I'm not far away.https://www.audizine.com/forum/showthre ... ild-thread

Image

Image

Image

Re: Eric Z with a 2008 Audi RS4 project

Posted: Wed Sep 16, 2020 5:23 pm
by brentp
Welcome, thanks for the introduction. Super clean car!

Be sure to check out the brand new RaceCapture beta app we are testing on Discord, too!