Can't open port after migrating to Windows 10

General Topics for configuring, operating and tuning the Megajolt. Also see the <a href="http://www.autosportlabs.net/MJLJ_V4_Operation_Guide">Operation Guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
bmcdaniel
Posts: 44
Joined: Sun Jan 06, 2013 2:49 am

Can't open port after migrating to Windows 10

Post by bmcdaniel »

Never had a problem connecting with XP but now with Win 10 I can't open the port. Same computer, same hardware, running V4.0.2. I've double checked the port number and port settings. Looking at the port in device manager I get the message:

"This device cannot start. (Code 10)
{Not Enough Quota}
Not enough virtual memory or paging file quota is available to complete the specified operation."

Anybody have an idea what I can do? Thanks in advance.

bmcdaniel
Posts: 44
Joined: Sun Jan 06, 2013 2:49 am

Post by bmcdaniel »

Ok, got the adaptor to work by installing an older version driver. Now I get the message:
"Timeout reading cylinder count".
Now what?

bmcdaniel
Posts: 44
Joined: Sun Jan 06, 2013 2:49 am

Post by bmcdaniel »

Picked up a Win 10-compatable USB serial adaptor off ebay for $8, works good and I was able to connect and edit my timing curve.
http://www.ebay.com/itm/111122588631?_t ... EBIDX%3AIT

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Glad you got it figured out!
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply