Are there any undocumented API commands? V4.

General Topics for configuring, operating and tuning the Megajolt. Also see the <a href="http://www.autosportlabs.net/MJLJ_V4_Operation_Guide">Operation Guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
parky1972
Posts: 38
Joined: Fri Aug 07, 2009 10:58 pm
Location: Manchester, UK
Contact:

Are there any undocumented API commands? V4.

Post by parky1972 »

Are there any undocumented API commands, or other commands?
I ask as I am looking at building a project for my car that will use a basic serial bus.
Commands sent between the megajolt a display and a secondary processor.
Some commands ment for the display or processor would be sent to the megajolt too.

I just want to make sure that megajolt will simply ignore them and that there are no additional commands that I could send in error that might shut down or change the firmware of the megajolt.

Thanks.

Jason.

parky1972
Posts: 38
Joined: Fri Aug 07, 2009 10:58 pm
Location: Manchester, UK
Contact:

Post by parky1972 »

Brent?

I'd like to move forward with this project. But don't want to risk erasing my test Megajolt unit.
However, I don't want to add unnecessary hardware if it's not needed.

Jason.

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi Jason,

There are no undocumented API commands. You can see the current firmware in the downloads section if you'd like to dig into that.

Sorry for missing this! Any business related inquiries you're welcome to reach us at [email protected].

Thanks,
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply