MXG + STACK TPMS + RaceCapture

Discussions on CAN mapping for ECUs, sensors, PDMs, and more.
Post Reply
RaceNiko
Posts: 4
Joined: Fri Oct 12, 2018 8:38 pm
Location: Colombia

MXG + STACK TPMS + RaceCapture

Post by RaceNiko »

Hi guys,


I have the STACK TPMS connected to the CAN2 network on the AIM MXG (CAN1 for the ECU) and it is woriking good. Both channels from ECU and TPMS are beign readed and recorded by the MXG.

My RCP is connected to a Data Hub (using AIM dashboard telemetry cable) which is connected to the CAN EXP port of the MXG.

I'm running the AIM SmartyCam preset but nothing is transmitted / received by RCP (except from the internal channels like yaw, pitch, roll, etc). I'm lost after two days trying everything.

Could be different the CAN mapping from the oldest AIM (Like MXL pista) products from the new ones (MXL2, MXG) ?
Someone running RCP with MXG, MXS, MXL2 could provide some advice?
How could I verify if RCP is receiving something from the MXG?

Thanks!
Attachments
Connections
Connections
Diagram.jpg (99.71 KiB) Viewed 1245 times
AiM Setup
AiM Setup
AIM.jpg (25.85 KiB) Viewed 1246 times
Race Capture
Race Capture
RCP.jpg (28.84 KiB) Viewed 1246 times

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi, Let's confirm you have things working correctly in the other thread before diagnosing CAN bus communications. We can do a CAN loopback test afterwards, and some other tests as well.

Thanks,
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply