Megasquirt integration question...

Discussions on CAN mapping for ECUs, sensors, PDMs, and more.
Post Reply
davef_dci
Posts: 39
Joined: Wed Mar 22, 2017 4:57 am

Megasquirt integration question...

Post by davef_dci »

Howdy,

I'm confused about the following statement in https://wiki.autosportlabs.com/Megasquirt_CAN

RaceCapture/Pro MK

Use the CAN High and Low connections from either CAN1 or CAN2 on the 24 pin Molex harness. Typically CAN1 is used, so you would use CAN 1 High and CAN 2 HIgh.

Shouldn't this say... you would use CAN High and CAN 1 Low????

Is this a typo or am I confused?[/u]

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Yes, that was a typo. Thanks for catching that!
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply