Honda CAN Integration

Discussions on CAN mapping for ECUs, sensors, PDMs, and more.
Post Reply
mpettus
Posts: 4
Joined: Wed Oct 30, 2019 4:20 pm

Honda CAN Integration

Post by mpettus »

Not sure if this is the best place to post this, but I was working on integrating our Hondata S300 CAN data into our RCP MK2. Long story short, the instructions for the Hondata integration show that the Connection for the RCP should be to CAN1 High and CAN2 Low.

I could not get this configuration to work, so I changed to CAN1 High and CAN1 Low. Everything seems to be working now. Simple fix, but I spent quite a bit of time searching for other reasons why I was not getting data.

Would it be possible to update the Wiki for the Hondata to others in the future?

Thanks
Matt
Attachments
Screen Shot 2020-03-03 at 10.31.09 PM.png
Screen Shot 2020-03-03 at 10.31.09 PM.png (65.26 KiB) Viewed 4772 times
RCP MK2

ferg
Posts: 36
Joined: Mon Dec 03, 2018 7:56 pm
Location: Paso Robles, California
Contact:

Post by ferg »

Isn't the whole idea of a wiki that the users can update the pages to fix the typo's and such. BTW, the page with the bad info is:

https://wiki.autosportlabs.com/Hondata_KPro4
David Ferguson
Veracity Racing Data
Autosport Labs Preferred Dealer
https://veracitydata.com

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Fixed!

Thanks for pointing that out. We locked user registration for the wiki, otherwise it would be run-over by bots with their spam updates.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply