CAN setting

Q&A for AnalogX Analog to CAN interface. <a href="https://wiki.autosportlabs.com/AnalogX">Installation and Operation Guide</a>
Post Reply
Takabayashi
Posts: 21
Joined: Tue Nov 13, 2018 5:23 am

CAN setting

Post by Takabayashi »

i saw Wiki.

For sensor using
My understanding is CAN ID is below

E4600 (base) +20 => E4620

Is it correct?

Offset meaning byte?

i want to know CAN setting.
(e.g ID , byte , bit )
Attachments
e.g. AIM
e.g. AIM
CAN_Setting.PNG (19.54 KiB) Viewed 3368 times

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hello,

The +20 offset is in decimal, not hex. Try adding 20 to the decimal base address.

Thanks,
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Takabayashi
Posts: 21
Joined: Tue Nov 13, 2018 5:23 am

Post by Takabayashi »

Thank you&#12288;!

i will try it.

Post Reply