Posted: Tue Feb 12, 2019 10:07 pm
With the EGT-8 interface, some questions:
* Is it an 11 bit interface?
* Is the support for it baked (hard-coded) into the MS2 firmware, or do you configure it using the TunerStudio CAN mapping interface? (the same interface AnalogX users were trying to use)
* Is it an 11 bit interface?
* Is the support for it baked (hard-coded) into the MS2 firmware, or do you configure it using the TunerStudio CAN mapping interface? (the same interface AnalogX users were trying to use)