Self contained, high quality, "CAN" transducer/enc

Q&A for AnalogX Analog to CAN interface. <a href="https://wiki.autosportlabs.com/AnalogX">Installation and Operation Guide</a>
Post Reply
rvc
Posts: 4
Joined: Fri Aug 04, 2017 6:31 am

Self contained, high quality, "CAN" transducer/enc

Post by rvc »

Brent, what am I missing here? Do you sell self contained sendors that speak "CAN"? I need much better reliability than an adapted bare board solution provides. I am not comfortable using home grown packaging solutions, therefor I am not comfortable with the AnalogX. A little more "aerospace like" canister that is hermetically sealed, vibration proofed, and manufactured to IOS9001 standards would work better for me. Does this https://www.stw-technic.com/products/se ... r-mo1-can/ self contained transducer/sending unit speak a dialect of "CAN" that your Racecapture/APEX understands? If not, then are there ANY well manufacture self contained "CAN" encoders available that do work with the APEX.

Additionally what is the status of AutoSportLabs and the Racecapture project? The forum is and has been very quite for a long time now? Am I safe to make a significant investment in a number of units....not from your point of view but MINE please.

Thank You.

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi,

The AnalogX is designed to be an low cost Analog to CAN converter that can be embedded into an existing system, or placed in your own enclosure - we make this very clear in the documentation. If you need something different, there are many choices on the market, and we can map any CAN bus protocol using our tools:
https://wiki.autosportlabs.com/CAN_Bus_Integration

If you'd like to keep up on the status of our projects, be sure to see our blog here:
https://www.autosportlabs.com/blog/

We have many projects in the works including software enhancements, and the new ShiftX3 sequential shift light, which is on pre-order.

We have a growing Facebook support group with over 600 members that is very active; it tends to be a better venue for fluid discussions, and is likely drawing people away from the forums to a degree. We will always have the forums since we still want to maintain an independent community from Facebook.

https://www.facebook.com/groups/1288770887817789

Hope this helps!
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply