Configurator: scrolling and viewing data log enhancements?

Discussion on Future Megajolt hardware / software upgrades.

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
dr.occa
Posts: 243
Joined: Fri Feb 23, 2007 10:52 pm
Location: TX

Configurator: scrolling and viewing data log enhancements?

Post by dr.occa »

brentp,

it could be that my installation is screwy but when i open and datalog, i would like to be able to keep the cursor on the information screen and scroll forwards and backwards through the data history w/ the arrow keys. should it already be able to do that or if not could that be considered for a future release? Also, is there a way to hide/un-hide data in the log e.g. Load Accel, RPM Accel, Correction, etc... for ease of viewing certain data?
AUTOSPORTLABS
NonStop Tuning
www.86garage.com

"Poverty is not a virtue."

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

I took a look at your datalog file and was hung up because I wasn't able to load it. It looks like the timestamps are formatted incorrectly for reading. I wanted to roll it into the 4.0.2 software but wasn't able to reproduce it.

With regards to the cursor, you're totally right- we need some accelerator keys so you can keep your mouse stationary and then scroll through the file. A somewhat cheesy work-around is to tab to the appropriate button and then hit 'space'.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply