Megajolt v3 aux hardware for cold start

Discussion on Future Megajolt hardware / software upgrades.

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
alfa boxer
Posts: 47
Joined: Tue Jun 05, 2007 2:50 pm
Location: LEEDS UK

Megajolt v3 aux hardware for cold start

Post by alfa boxer »

Hi, could somebody help :roll: . Iwould like to add the aux input for cold starts of the engine by advancing the timing untill a certain temp, i believe this can be done. The only problem is when it comes to electrical instalations i am hopeless! could you please post a list of parts i require, board resistors transistors etc, so when i go to the electrical shop they will know exactly what i can use picture would also be good as the electrical drawings do not make much sense to me. Better still are these units for sale many thanks lee :oops:

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi Lee,

You may want to jump in on this thread:
http://www.autosportlabs.org/viewtopic. ... 0&start=45

It only requires a few fairly generic components to implement the AUX input. For the component selection, perhaps someone in the UK also performing this mod can provide a list of components and/or part numbers from a local supplier!

Regards,
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply