Graphic programming of advance curves

Discussion on Future Megajolt hardware / software upgrades.

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Alex B
Posts: 163
Joined: Sat Aug 09, 2008 10:32 am
Location: Hegra, Norway

Graphic programming of advance curves

Post by Alex B »

In addition to the 10x10 grid a graphic way to put in the advance curves might be handy. At 0.47 of the film does it start. Both centrifugal and vacuum advance can be changed that way.

http://www.youtube.com/watch?v=0QeaNSlc1N8

Alex

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi Alex,

We have this in the software - in our case, we expressed it as a 3D view for both load and RPM:
http://www.autosportlabs.net/MJLJ_V4_Op ... erspective
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply