START DELAY TILL' SPEC RPM

Discussion on Future Megajolt hardware / software upgrades.

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
o07wray
Posts: 15
Joined: Tue Sep 03, 2013 3:51 am

START DELAY TILL' SPEC RPM

Post by o07wray »

My MJjr has only one issue,, it fires instantly.. kicking back against the starter... Even before the engine has made 1 full rev the coil has fired!!

My suggestion: A set number of rev's before MJjr fires or a fixed/adjustable min rpm before it fires..

I thought about installing a NC push button switch that I can push in and cut the power to the MJjr untill the engine s starter has it turning over good,,,then release the button to turn on the MJjr...

Anyone else done the switch thing?

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Unfortunately, with the current design the EDIS module fires the plugs on its own; Megajolt merely controls ignition advance. You'd be able to disable the coil using the button you described, however.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply