Configuration Software updates

Post by **brentp** » Sun Feb 29, 2004 7:13 am

I will be working on updating the configuration software- currently these are the planned fixes and updates:

1- Save and load ignition configurations!
2- attempt to automatically read the configuration once the program start up
3- An option to automatically flash once you hit the update button. Right now flashing is a seperate operation from updating- Update alters the data in the controller RAM whereas flashing copies the ignition config from the controller RAM to the flash memory, so the configuration persists when the power cycles.
4- Use an installer program to ease installation of the configurator app.

Post by **brentp** » Sun Feb 29, 2004 7:15 am

I updated the configuration software to address 1 and 2 in the list above.. it's available on the downloads page.