shielded wiring to MJLJt/e

General Megajolt Questions and Answers

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
weiss enterprises
Posts: 4
Joined: Wed Nov 30, 2016 11:34 pm

shielded wiring to MJLJt/e

Post by weiss enterprises »

I have the wiring from the MJLJ to a terminal block, as well as the EDIS. The wires from the TPS and the CPS on the engine to the terminal block are shielded. Do I need to have the wires from the MJLJ box for the TPS to the treminal block replaced with shielded wiring too?

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

It's not super critical to have those wires shielded, but if you have extra, it wouldn't hurt!
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply