miss fire on EDIS-8

General Megajolt Questions and Answers

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
55f100460
Posts: 2
Joined: Sat Apr 28, 2018 4:45 pm

miss fire on EDIS-8

Post by 55f100460 »

I have coil A on pin#8 Coil B on pin#9 Coil C on pin #11 and coil D on pin# 12, When I check the timing on each coil I get 10* on A 270* on B 90* on C and 180 on D.
When I change the coils to A on pin #8 B on pin# 11 C on pin#12 D on pin# 9 when I check timing on each coil I got 10 on pin# 8 90* on pin# 9 180* on pin# 11 and 270* on pin# 12
Is there a issue with the EDIS or VR ?

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

A VR sensor problem would show up as an intermittent misfiring on an otherwise smoothly running engine.

If it's continuously missing, then you probably have a wiring issue with the coil pack. *Possibly* the EDIS-8 might be bad, but it's very likely a mis-wiring.

Let us know what you find out -
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply