VR sensor selection

General Megajolt Questions and Answers

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Posts: 1
Joined: Sun Sep 09, 2018 4:44 pm
Location: Houston

VR sensor selection

Post by Turbosix »

My first post with a simple question.
Putting EDIS 6 on Ford 200 straight six.
Trigger wheel is 36-1 custom made from 1/8" plate steel.
Teeth are .250" square.
What VR sensor do I use?
Part number if you can.
I know the importance of matching tooth width with sensor; so I want to be sure to use the correct one.

Site Admin
Posts: 6233
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi - You can use the WELLS SU256 or Standard Motor Products PC18

We sell the sensor here:
https://www.autosportlabs.com/product/f ... on_sensor/

Thank you,
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply