lead position on coil pack variable ?

General Megajolt Questions and Answers

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
EA82GT
Posts: 24
Joined: Sat Jun 12, 2021 11:01 pm

lead position on coil pack variable ?

Post by EA82GT »

if my thinking is correct, on a twin coil pack for a 4 cylinder, the lead positions of each side (each coil) can be swapped, front to back, back to front BUT NOT side to side (from one coil half to the other) without any change to the operation or firing order ?

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Re: lead position on coil pack variable ?

Post by brentp »

Most 4 cylinder coil packs, like the ford, are 3 terminal, where the center pin is 12v. You can swap the side connections, but then you will also have to swap the high voltage leads to correspond.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply