New configuration software for V3 hardware

Information and announcements on updates to the Megajolt firmware and PC software

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Yvan
Posts: 86
Joined: Fri Feb 08, 2008 7:58 pm
Location: Kragujevac, Serbia

New configuration software for V3 hardware

Post by Yvan »

I noticed that configuration software for V4 hardware is available for download:

http://www.autosportlabs.net/MJLJ_V4_Downloads

Is there a version for V3 hardware?

I finally found the use for the user configurable outputs. :D I fitted a/c to my car, and when it's on and I am stuck in traffic engine temperature rises above normal. Originally car had only one fan powered by the engine, and now I added another two speed electrical one.

When I turn a/c on fan is automatically started on low speed. :idea: What I want is that mjlj starts it on high at the preset temperature. Now I have to do that by hand keeping an eye on the temp gauge.

So is there new configuration software for V3 hardware :?:
'87 BMW 316 E30
1600cc M10B16
petrol + LPG, MJLJ

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi Yvan,

There will be a firmware upgrade for V3 hardware that brings in almost all of the features in V4. When that firmware is complete there will be a new version of the configuration software to compliment the firmware.

This is also touched-upon in the V4 testing thread in "Future Upgrades"- there you will see what features the new V3 firmware will have.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Yvan
Posts: 86
Joined: Fri Feb 08, 2008 7:58 pm
Location: Kragujevac, Serbia

Post by Yvan »

OK, thank you. When can I expect that I can download it?
'87 BMW 316 E30
1600cc M10B16
petrol + LPG, MJLJ

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

In the next few weeks, likely, while the 4.x firmware and config software is still fresh in my mind. :)
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Yvan
Posts: 86
Joined: Fri Feb 08, 2008 7:58 pm
Location: Kragujevac, Serbia

Post by Yvan »

I was away for a month, any news on this? Will firmware upgrade for V3 hardware be available soon?
'87 BMW 316 E30
1600cc M10B16
petrol + LPG, MJLJ

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Still working on it, but yes, soon. I'm striving to have a consolidated config software for both V4 hardware/firmware and corresponding updated firmware for V2/V3 hardware.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Yvan
Posts: 86
Joined: Fri Feb 08, 2008 7:58 pm
Location: Kragujevac, Serbia

Post by Yvan »

OK, thank you.
'87 BMW 316 E30
1600cc M10B16
petrol + LPG, MJLJ

Post Reply