1993 Dodge Daytona

Show off your Megajolt installations, vehicles and action shots here!

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
jtuite
Posts: 1
Joined: Thu Sep 04, 2014 8:11 pm

1993 Dodge Daytona

Post by jtuite »

I have a 93 Daytona powered by Chryslers version of the Mitsubishi 3.0 V6 that I Turbocharged, I was using the stock electronis for ignition and fueling but the only problem was I couldnt go higher than 8-10 PSI without running the risk of knock due to the ignition not retarding the timing properly.

So I started to look for something I could install without too much trouble and without going to a standalone unit, and I happened to stumble on something called MEGAJOLT and it turned out to be exactly what I was looking for.

I am currently running 8PSI but plan on turning it up to 10-13PSI in the near future. I have had it installed for a little while now so I figured I would share, below are some pictures of it installed.

Image[/img]
Image
Image
Image
Image

Post Reply