4AC on Megajolt

Show off your Megajolt installations, vehicles and action shots here!

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
84hachi
Posts: 1
Joined: Thu Mar 02, 2017 10:28 am

4AC on Megajolt

Post by 84hachi »

Hi guys! I own a 1984 Toyota Corolla Sport SR5 (AE86) with a 4AC that I successfully adapted Megajolt to a year ago. I used 2JZGE coils instead of the Ford coil. I couldn't find a decent place to put the Ford coil. I made it PnP with the factory distributor connector. Tach works. Trigger wheel is made by Techno Toy Tuning, mounted to their single belt pulley for a 4AGE. Carburetor is a Weber 38 DGES with an internal air horn.

Base map has been good to me, though I'm gonna have to write something with the 284F high lift camshaft and aluminum adjustable timing gear that will go in. So, expect a lot of questions in the coming weeks.
Attachments
Current status of my 4AC.
Current status of my 4AC.
22264773_1672160772825402_113390475_n.jpg (109.36 KiB) Viewed 12467 times
2JZGE coils and wires.
2JZGE coils and wires.
SAM_0705 - Copy.JPG (243.06 KiB) Viewed 12467 times
Techno Toy Tuning 4AGE crank pulley with their Trigger wheel, Ford Escort Crank Sensor
Techno Toy Tuning 4AGE crank pulley with their Trigger wheel, Ford Escort Crank Sensor
edis2 - Copy.jpg (126.01 KiB) Viewed 12467 times
The 1st ever EDIS 4AC is all mine.

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Super clean install! thanks for sharing :)
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply