Map for A-Series

zordlyon · Post by **zordlyon** » Mon Sep 14, 2009 5:18 pm

I people, i'm portuguese, and i'm a new user of this great forum, and i need a help for my mini.
I'm implementing a Megajolt and i need a map for my engine, the caracteristics of my engine is:

->Pistons Omega "0.60 Lightned
->ConRods flightned on Swiftune
->Cams 296Sp
->CrankShaft Flightned
->DropGears
->GearBox of 1275 GT
->Valves 36 x 31
->Rocker Assembly 1.5 Ratio
->Valve Springs Race
->Carburator Weber 40DCOE
->DUPLEX CHAIN AND VERNIER ADJUSTABLE STEEL GEAR SET
->Flywheel with 3.8kg

Please, if anyone have a map, or create me a map i great you for help me...

Cumps...

NITROPIXIE · Post by **NITROPIXIE** » Mon Sep 14, 2009 9:24 pm

Welcome to the forum. Each engine is generally different and to get the best out of each individual engine they have to be setup and tuned individually. You can almost certainly try other peoples Maps they have posted up here. Have you tried any other mini maps in this part of the forum???

Try http://www.autosportlabs.org/viewtopic.php?t=1815
or http://www.autosportlabs.org/viewtopic.php?t=1638

If your worried about damaging you engine then too little advance is better than too much. Keep us posted on how it goes.

Get some photo's of your car up aswell please in the http://www.autosportlabs.org/viewforum.php?f=9 section. Always nice to see a new car up

Ryan

zordlyon · Post by **zordlyon** » Tue Sep 15, 2009 9:57 am

I posted a photos

the engine don't ready, but when its ready i'm post the evolution..but i'm studing how program the megajolt, because i don't see much people with this...

and i don't know anyone with megajolt, then i need help for program the megajolt for my engine...

Thanks Nitro...