Missing components from kit.

Megajolt Kit assembly Question and Answers. Be sure to review the <a href="http://www.autosportlabs.net/MJLJ_V4_kit_assembly_guide">Kit assembly guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
H8my408
Posts: 3
Joined: Sat Mar 27, 2010 11:21 am
Location: Lynnwood, Washington

Missing components from kit.

Post by H8my408 »

I recently ordered the MJLJ DIY kit, and soldered it together lastnight. As I was going through, I came across a flaw = I only had one "Schottky Diode." I took all precautions to not allow a slip or bounce of a component. Where can I go to get a replacement, and what are it's specs so I can make sure I'm getting the right one?

I am in Lynnwood, Washington. And if I'm not just an idiot, so is Autosport...
Brent - I left a message on the phone with my contact information.

I hope for an easy solution, as I am foaming at the mouth. My project is at it's final stages of the buildup, into life! The minutes are days!

Jonathan

Edit: It's D7 to verify exact component required.
1982 Mustang GT
1997 351w
Demon Carbed
EDIS-8 Conversion
5 Lug
93 Cobra R Wheels
Four Corner Disc Brakes

HP and TQ coming sooner.
Megasquirt and MONSTER Junkyard ITB's, later.

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi Johnathan,

We got your message- sorry for the inconvenience. Good news- D7 isn't critical- so you can proceed with your build and testing- we will get one out to you in person or we'll drop it in the mail for you and you can add it later on.

Thanks,
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

H8my408
Posts: 3
Joined: Sat Mar 27, 2010 11:21 am
Location: Lynnwood, Washington

Post by H8my408 »

In my mind, I've replied to this already, however, if we link up over the phone, I can rendezvous somewhere local.

As for my opinion of the kit, I think it's a smash! You shouldnt even have the pre-assembled kits!

"DIY? Oh hell yes. I even assembled the computer!"
1982 Mustang GT
1997 351w
Demon Carbed
EDIS-8 Conversion
5 Lug
93 Cobra R Wheels
Four Corner Disc Brakes

HP and TQ coming sooner.
Megasquirt and MONSTER Junkyard ITB's, later.

H8my408
Posts: 3
Joined: Sat Mar 27, 2010 11:21 am
Location: Lynnwood, Washington

Post by H8my408 »

Recieved the D7 component in the mail today! Thanks again Brent! Cant wait to update everyone with the introduction and completion of the project, all at the same time.

Jonathan.
1982 Mustang GT
1997 351w
Demon Carbed
EDIS-8 Conversion
5 Lug
93 Cobra R Wheels
Four Corner Disc Brakes

HP and TQ coming sooner.
Megasquirt and MONSTER Junkyard ITB's, later.

Post Reply