knock

EDIS and Megajolt installation related topics. Be sure to review the <a href="http://www.autosportlabs.net/MJLJ_V4_vehicle_installation_guide">Vehicle installation guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
bernard dominique
Posts: 7
Joined: Thu Feb 24, 2011 3:58 pm
Location: france

knock

Post by bernard dominique »

Hello, can one connect knocksenseMS for megasquirt entered auxiliary megajolt? thank you

http://www.viatrack.ca/

Funky Diver
Posts: 133
Joined: Tue Jun 08, 2010 7:06 pm

Post by Funky Diver »

It should work using one of the programmable inputs. So long as it provides the relevant output.

bernard dominique
Posts: 7
Joined: Thu Feb 24, 2011 3:58 pm
Location: france

Post by bernard dominique »

hello,

5v normal
0v knock

how to configure auxiliary input (bins)


thank you

Funky Diver
Posts: 133
Joined: Tue Jun 08, 2010 7:06 pm

Post by Funky Diver »


bernard dominique
Posts: 7
Joined: Thu Feb 24, 2011 3:58 pm
Location: france

Post by bernard dominique »

Hello,

connection+hardware modification,this is good

http://www.autosportlabs.net/MJLJ_V4_ve ... put_source



configure auxiliary input,this is good

Image

Uploaded with ImageShack.us

thank you

Funky Diver
Posts: 133
Joined: Tue Jun 08, 2010 7:06 pm

Post by Funky Diver »

There ya' go!! 8)

Top banana. Let us know how you get on with it, knock sensing would be pretty impressive as an add in.

bernard dominique
Posts: 7
Joined: Thu Feb 24, 2011 3:58 pm
Location: france

Post by bernard dominique »

connection+hardware modification+configure auxiliary input

what do I do to make it good????

Salamander
Posts: 89
Joined: Mon Nov 13, 2006 9:46 pm

Post by Salamander »

Image

this works very well in MSII 0-5v

Post Reply