Hello - I built a GBS Zero about 2 years ago (about a year before that I purchased the MJLJ) not realising at the time that a) it was MAP and b) I was going to be fitting CBR600 carbs. Being bike carbs, I want to use the TPS, which is sitting redundant at the moment. Is this possible by conversion?
Also...
The engine is a Ford CVH 1.8 from a 1993 Sierra, is there an ignition map that anyone recommends? Presently there is a stock 2.0 Zetec map loaded.
Many thanks, all!
Anthony
Can I change MJLJ from MAP to TPS (and how)?
Moderators: JeffC, rdoherty, stieg, brentp
-
- Posts: 2
- Joined: Thu May 10, 2012 3:44 pm
- Location: Norfolk, England
Inspect the PC board of the Megajolt. if it has unpopulated components in the box that says "TPS" then you can purchase the TPS conversion kit and solder the components in place.
http://www.autosportlabs.com/mjlj-conversion-p-53.html
Also: you will need to remove the MAP sensor in the process.
http://www.autosportlabs.com/mjlj-conversion-p-53.html
Also: you will need to remove the MAP sensor in the process.
-
- Posts: 2
- Joined: Thu May 10, 2012 3:44 pm
- Location: Norfolk, England