Tps to map conversion

Megajolt Kit assembly Question and Answers. Be sure to review the <a href="http://www.autosportlabs.net/MJLJ_V4_kit_assembly_guide">Kit assembly guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Bigboy88
Posts: 1
Joined: Tue Feb 11, 2014 6:23 pm

Tps to map conversion

Post by Bigboy88 »

Hi I just wondered if I can just solder a map sensor to my board I have a mega jolt/e rev f tps
Any advise would be great

cng1
Posts: 282
Joined: Mon Dec 06, 2004 7:56 pm
Contact:

Post by cng1 »

No, you cannot add an on-board MAP sensor to your ECU. You can however run an external MAP sensor in place of the TPS.
Official Megajolt distributor for UK and Europe.
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com

bogdan_bus
Posts: 3
Joined: Wed May 14, 2014 6:21 pm
Location: romania

Post by bogdan_bus »

map conversion it's very simple.. i use an gm map sensor and an variable resistor for calibration

Post Reply