Question about Flash

General Topics for configuring, operating and tuning the Megajolt. Also see the <a href="http://www.autosportlabs.net/MJLJ_V4_Operation_Guide">Operation Guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
crossflow
Posts: 16
Joined: Thu Jan 06, 2011 10:09 am
Location: Germany

Question about Flash

Post by crossflow »

Hi,
I have a MegaJolt V3 and I'm about to put it in my car.
EDIS is running already in Limp Home mode.
I have some questions about flashing.
I have found this and I quote from the Operation guide:
"Persisting the data to flash requires a significant amount of time"

1. Is there a message when it is flashing ?
2. Is there a message when flashing is finished ?
3. How many minutes does the flashing needs ?

I have read all 13 pages on this forum, but didn't find anything.

Thanks for your help.

Cornelius

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

If you're referring to this section:

http://www.autosportlabs.net/MJLJ_V4_Op ... figuration

We didn't mean it would take minutes; it actually takes less than a second to commit the data to flash. It needs to be done as a separate process as a matter of practicality with how the firmware is designed and the requirements of the Megajolt processor.

Hope that helps!
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

crossflow
Posts: 16
Joined: Thu Jan 06, 2011 10:09 am
Location: Germany

Post by crossflow »

Thanks, Brent

Cornelius

Post Reply